FAQs

The smart door lock is suitable for left hand and right hand opening door. As showed in figure, with the screwdriver, loosen the inside screw, rotate the handle 90 ° to left/right, then tighten the screw.

A. First select the suitable spindle according to the door thickness.

B. Install the spindle through spindle spring as showed in figure.

Note: Some existing triple lock kits top and bottom locks, including the plastic adaptor need to be reversed. This allows the triple kit to be locked from the inside by lifting the Ultra-Secua interior handle upwards.

Remote management.

Remote management is via a simple web-based system which can be accessed from any location on any device.

Once online, you can see at a glance which locks are free and ready to be allocated to new users.

The rental period can be set for an individual user, or group of users, and locks can even be set to unlock automatically.

The same system can manage multiple sites, simply and conveniently, all from one place.

How it works.

Using the Remote Allocation System (RAS) lock management software, new user codes are generated online. When the user enters it into their lock it immediately replaces the old code.

This ensures safe and secure access for new users without an administrator needing to be present.

1. On ordering the smart locks, a customer account is set up with a unique log-on to the RAS lock management website.
2. The smart locks are registered on the RAS website by the teams at L&F.
3. Use the website to generate a new code each time a new user wants access.
4. The current code works until the next code is entered.

The National Defense Authorization Act (NDAA) is the name for each of a series of United States federal laws specifying the annual budget and expenditures of the U.S. Department of Defense. In August 2018, US Congress passed the John McCain National Defense Authorization Act (NDAA), which contained a section called Section 889: Prohibition on Certain Telecommunications and Video Surveillance Services or Equipment.

To continue its strong growth and recognition in the world CCTV market, Milesight produce a range of NDAA Compliant cameras and NVR’s, which do not use or deploy critical components including SoCs (System on Chips) produced by NDAA banned component vendors. These are recommended for enterprises and critical applications where compliance is essential.

Lock Focus wooden fixing type W is suitable for timber panels with a round fixing hole.

It consists of a nut and pronged washer. The pronged washer bites into the timber when the nut is tightened. This prevents the lock from spinning in a round hole.

A large quantity of locking systems utilize the same depth and space measurements, although not all require the same amount of actual cuts on the key. InstaCode when printing a card always displays the maximum number of spaces to suit the largest number that could be required, therefore saving you from having to carrying multiple cards for the same space and depth information.

If you are cutting a key with only four cuts and the card has seven spaces just ignore the other positions that are not utilized with the key you are cutting.

The frequency of a remote control is critical to its working ability with a vehicle.

Vehicles such as the Holden Astra and Vectra range require a specific frequency range per vehicle.

The best way to test the frequency is by checking any existing keys with the AD35 remote frequency tester. Saying that, frequency band width alone is not a single sure way to determine if a remote can be programmed into a vehicle. The radio band is simply used to transmit data to and from the vehicle, which data is transmitted and the data composition is governed by other technologies. A perfect example is again the Holden Astra and Vectra which have identical frequencies and appearance, but can certainly not interchange.

The W4 can be used as a reader or controller. Wiegand 26-37 is supported, both input and output.

To set Wiegand format

9 26-37 # (factory default is Wiegand 26)

Special care should always be used when entering your code. The keypad is protected with a tough polypropylene material that makes a puncture unlikely, and impossible for dust and debris to interfere with the operation of the push-button keys.

The new plastic dome design is superior to metal domes and will continue to function even if the dome is damaged and collapsed. Our laboratory testing has surpassed 500,000 code input cycles with no failures using a pointed input tool, similar to a ballpoint pen.

Although wear was noticeable after this extensive testing, the lock remained operational. In actual operation, changing codes periodically will prevent noticeable keypad wear.

There are two cards for HON66 that use the same code series.

• Silca card: 2354 - Shallower
• Silca card: 1587 - Deeper

If unsure which to use, it is best to use the shallower Silca card 2354. If the key fails to open the lock you can cut it again using the deeper Silca card 1587.

Both Video Doorbell 2 and Video Doorbell 3 send notifications to your phone, tablet, and PC when anyone presses your doorbell or triggers the built-in motion sensors. When you answer the notification, you can see, hear, and speak to visitors from anywhere.

Regarding main differences, Video Doorbell 3 has 2.4GHz and 5GHz dual-band wifi (vs 2.4GHz only on Video Doorbell 2) for enhanced connectivity and an additional “near” motion zone that provides motion detection in areas only 1.5 - 4.5 metres in front of your home (reducing irrelevant Motion Notifications further away).

Video Doorbell 3 also has improved screw strength, a redesigned easy-to-remove faceplate, and automatic chime connection which makes installing your video doorbell easier than ever.

Possible cause:End or Side pressure from the safe bolt work.
Solution: Hold your safe handle to the closed position with light pressure then enter your combination. Hold your safe handle to the nuetral or center position then enter your combination

Possible cause: Spindle is too long.
Solution: Remove the keypad and examine the spindle length making sure that there is not pressure getting exerted on the lock body. Note: A locksmith is recommended to perform this action.

Possible cause: The Yellow, Blue or Black tab is out of alignment with the metal notched baseplate.
Solution: Pull your tab releasing the dial part of the keypad and pull out. Use an ice pick and try to align the metal notched baseplate with the plastic channel at the top of the keypad.

Cause: The Yellow, Blue or Black tab is out of alignment with the lock on the front of the keypad.
Solution: Turn dial and center your tab above the lock icon on your keypad. Enter your combination.