The TPS13-10DC is a fully regulated switch mode power supply providing 13.5 volts DC at 10 Amps. Due to its switch mode design, the TPS13-10DC generates significantly less heat than conventional power supplies.

TPS13-10DC features very low noise at full load with overload, short circuit and over voltage shutdown protection and is configured with a 13.8VDC 1.4A battery charger.

Incorporating short circuit and thermal overload protection, TPS13-10DC models have been designed and thoroughly tested to comply with stringent AS/NZS 60950.1.2015 Electrical Safety and CISPR11:2004 EMC standards, making them energy authority approved & suitable for use in domestic, industrial scientific and hospital applications.

Certificate of Approval ASA-194021-EA

A removable 10 way connector provides outputs for DC Load, Battery Charger, Mains Fail Relay & Low Voltage / Battery Fail Relay Output.

Equipped with an AC fail relay and Green LED indicator which changes state upon loss of 240V AC mains power, the low battery relay and Red LED indicator are only functional during a mains power failure and will operate when the battery voltage reaches 10.5V.

This supply is designed to operate at full output from 0-50’C without derating and does not require additional heat-sinks or fans to meet stated specifications, relying only on convection cooling only.