The TPS13-2.5DC power supply provides high quality, regulated 13.5Vdc at up to 2.5 Amps via its primary output channel (to power loads such as Access Control & Alarm systems), whilst a separate 13.8Vdc 700mA channel keeps standby batteries charged – making TPS13-2.5DC a 3.2A supply.

The advanced design of the TPS13-2.5DC provides outstanding performance in the field, whilst maintaining significantly lower operating temperatures due to the switch-mode design.

Incorporating short circuit and thermal overload protection, TPS13-2.5DC models have been designed and thoroughly tested and complies with AS\NZ Electrical Safety Standard 60950.1.2015 and EMC standards CISPR 32-2015 making them suitable for use in domestic, industrial scientific and hospital installations.

Certificate of Suitability SAA-200277

Equipped with an AC fail relay and Green LED indicator which changes state upon loss of 240V AC mains power, the low battery relay and Red LED indicator are only functional during a mains power failure and will operate when the battery voltage reaches 10.5V.

This supply is designed to operate at full output from 0-50’C without derating and does not require additional heat-sinks or fans to meet stated specifications, relying only on convection cooling only.