The Neptune 5AMP Power Supply offers exceptional value for money. Ideal for smaller installation applications, the Neptune power supply has a lockable enclosure that is small and compact and has a 12V 7AH battery to provide backup when required.
Battery included.
The Neptune Power Supply has been fully tested to meet all Australian standards so it is a must have for any electronic equipment installer.
| |
Specification |
|
| INPUT |
Voltage (AC mode) |
190 - 265VAC |
| Frequency |
50 or 60Hz |
| OUTPUT |
Voltage (AC mode) |
13.8V ±2% |
| Voltage (BT mode) |
Same as battery voltage |
| Rated Current |
5A |
| Rated Power |
80W (with charging) |
| BATTERY |
Battery Type |
12V lead acid |
| Charge Voltage |
13.8V ±2% |
| Charge Current |
800mA |
| PROTECTION |
Input Fuse |
2A / 250VAC |
| Overload |
6A ±5% |
| Over Voltage |
16V ±5% |
| Deep Discharge |
10V ±2% |
| Short Circuit |
Hiccup mode |
| TEMPERATURE |
Working: -20 ~ 50°C |
Storage: -30 ~ 80°C |
| HUMIDITY |
Working: 20 ~ 80%RH |
Storage: 10 ~ 90%RH |
| DIMENSIONS |
265 x 195 x 75 mm |
|
LED Indicator
| LED status |
On |
Off |
Flickering |
| RED |
Input OK |
Input Failure |
******* |
| GREEN |
Output OK |
Output Failure |
******* |
| YELLOW |
Battery Fully Charged |
Battery Discharging |
Battery Charging |
Note: All LED indicators are flickering when a short circuit or overload occurs.