A medium temperature smoke astragal seal designed for plain or rebated meeting stiles of timber double doors where a centre latch bolt may be required or, where both doors are active. The seal is achieved by a pair of silicon fins. Two RP71Si seals are installed on to the one door stile which allows space for a latch between the two seals.
The legs of the seals can be checked out to accommodate the latch bolt front plate providing a continuous seal.
Note: Minimum door thickness subject to centre latch and dimensions of morticed door bottom seals.
Location: Meeting stiles of double butt hinged and centre pivot double acting doors.
Min/Max Gap: 3 mm to 5 mm.
Finish: Satin clear (silver), bronze, black anodised aluminium (15µm) or paint at extra cost.
Fixing: Screw fix. Colour matched zinc plated, cross recess head CSK S.T. screws supplied. Fixing holes are pre-drilled and countersunk.
Seal: RP37Si grey or black silicon rubber (SE).
Sizes: Available in stock lengths.
Approvals
Acoustic AUS/NZ: NCC Spec. F5.5.
UK/EU: Approved Document E. Rated to BS EN ISO 717.1.
Fire Gasket flammability index 1 when tested to AS1530.2.
Smoke NCC Spec. C3.4. AS1530.7 & BS EN 1634-3. Meets smoke leakage rates specified in AS6905 & EN 13501-2 “Sa”, “Sm”.
Energy NCC Pt. 3.12.3.3 & J3.4.