• Online IP based door controller.
• Two wall reader connection that can be configured as 2 different doors or one door reader in and reader out locking.
• Anti pass-back mode available by connecting 2 wall readers and set up as one door.
• 4 relay outputs: 6 inputs to connect to, Door detector, request to exit switch (RTE), office switch.
• 2 different tampers:1 x tamper input, 1x tamper switch.
• Door monitoring and tamper monitoring via contacts input (intrusion alarm and door left opened alarm.
• To be used with all SALTO XS4 2.0 Readers (WRDxxxx, WRM90041 and WR9004FS1 series).
• Virtual network capable through SALTO Virtual Network technology.
• All communications between the carrier and the wall reader are encrypted and secure2.
• The maximum cable length between the door controller and the wall reader is up to 400 meters (Depending on the cable).
• Connection to the wall reader using 4 wire connection, twisted pair.
• Power consumption: 12V DC 400mA (without XS4 2.0 readers), supplied by an adaptor. POE version to be released

Housing/cover not included.